The Unauthorized Ubiquiti Wireless with LABS Course
Learn how to set up Wireless network
What you will learn
Know what equipment are required to follow this course
Understand what is the meaning of Frequency
Understand what is the meaning of Wavelength
Have a global idea about RF Fundamentals and difference between Low and high frequencies
Understand the 802.11 service sets: SSID, BSS, BSSIS, BSA, ESS
Understand the difference between management and data frames (Beacon, Probing, Authentication, Association, Data)
Understand the Free Space Path Loss (FSPL)
Understand how the RF signal is attenuated when passing through materials
Understand the 2.4 GHz spectrum and its non-overlapping channels
Understand the difference between co-interference and adjacent interference
Understand the 5 GHz frequencies and the frequency bonding
Understand the IEEE 802.11 standards
Understand what is noise floor
Understand what SNR is and its relation to the noise floor and the Wireless signal
Understand what is Guard interval and its relation to the inter-symbol interference
Understand the difference between Zero Hand-off Roaming and Fast Roaming (802.11r)
Understand how CSMA/CD and CSMA/CA work
Understand the hidden nodes problem on wireless
Understand how RTS/CTS solve the hidden node problem
Understand the collision at the client side
Know what are the different UniFi AP's available
Know what is UniFi Cloud Key (UCK) and UniFi Security Gateway (USG) router
Configure the Router and the Switch behind the UniFi AP
Know what is the usage of the Ubiquiti Device Discovery Tool
Setting up the controller on UCK and adopt the UniFi AP to it
Understand how to adopt a UniFi AP to the controller
Configuring the wireless AP to provide internet via wireless
Configure the router, the switch and the AP's with VLANs for Employees and guests
Know how to adopt the UniFi Security Gateway to the controller
Understand and configure Firewal rules on the USG router
Understand and configure DPI restriction on the USG router
Know how to enable the advanced feature on the UniFi AP
Understand what is Airtime fairness and how to enable it on the UniFi AP
Understand what is Band Steering and how to enable it on the UniFi AP
Understand what is Wireless uplink and how to enable it on the UniFi AP
Understand how to configure Guest portal with a single password
Understand how to configure Guest portal with Facebook Wi-Fi check in
Understand the usage of the MAP on the controller to design a good Wireless network coverage
Understand how to configure Guest portal with Hotspot and vouchers
Why take this course?
This course is not officially sponsored by Ubiquiti Inc. and not an authorized course by Ubiquiti Inc. We are neither affiliated with nor endorsed by Ubiquiti Inc. We respect the Trademarks of the mentioned company and institution.
Ubiquiti Access Points are one of the best products in the wireless market nowadays. They are very stable & efficient, in addition they are very cost-effective products. However, to be able to configure a good Wireless network using Ubiquiti UniFi AP's, you require to understand the theory behind Wireless LAN and you also need to know how to configure the UniFi AP.
In my course, I will pass through all theory needed to understand the WLAN, and we are going to make a lot of LABS to make things easier for you.
In this course, you will learn the following topics:
WLAN Fundamentals such as
Unlicensed Radio Spectrum
Channel Operation
Regulatory Domains
etc...
WLAN Planning such as
Wireless Technology
Coverage & Channels
TX Power
Antenna Gain
etc...
Basic Adoption & Configuration such as
Multi-Site
Layer-2 Adoption
WLAN Groups
SSID, Security & VLANs
etc...
Advanced Adoption & Guests such as
Layer-3 Adoption
Zero-Handoff Roaming
Guest Portal
Customization
etc...
If you wish to master configuring wireless using Ubiquiti products, please do not hesitate to take this course.